Servicing Melbourne Wide
Years of HVAC Experience
Price Beat Guarantee
Manufacturer Warranty*

Gas Wall Heater Servicing Melbourne

CONTACT US

GET A FREE QUOTE.

Gas Wall Heater Servicing in Melbourne


Gas wall heaters and wall furnaces keep a room or a whole home warm through Melbourne's winters, and many older northern-suburb homes still run brands like Vulcan, Pyrox, Rinnai and Braemar. Because these units burn gas, and many older ones are open-flued, regular servicing is a genuine safety matter, not just a tune-up. BM Heating & Cooling provides thorough gas wall heater servicing across Melbourne, carried out by licensed gasfitters, from our base in the northern suburbs.

Every service includes a full clean, inspection and tune of the heater, and a carbon monoxide safety test. Energy Safe Victoria warns that any gas heater can spill carbon monoxide, and that open-flued heaters like many wall furnaces can spill it more easily than other types. Carbon monoxide is colourless and odourless, so the only reliable way to catch a leak is with proper testing during a service.

Energy Safe Victoria recommends having your gas heater serviced at least once every two years by a qualified gasfitter, with a carbon monoxide check as part of the service. For older or open-flued wall furnaces we recommend a check every year, before winter. Whether you bought the heater or inherited it with the house, we can look after it.

We service gas wall heaters throughout Reservoir, Preston, Thornbury, Coburg, Bundoora, Heidelberg, Epping, Northcote, Brunswick and right across the Melbourne metro area.

What a Gas Wall Heater Service Includes


Our licensed gasfitters carry out a complete service on your wall furnace or gas space heater. Here is what is covered.

Burner and heat exchanger: remove the front cover, clean the main burner and burner ports of dust, lint and insects, and inspect the heat exchanger for cracks or corrosion, the part that can leak carbon monoxide into the room if it fails.

Gas, ignition and controls: test the gas pressure to spec, check the pilot light, igniter and thermocouple so the flame lights and stays lit safely, and confirm the thermostat is working.

Clean and vent check: clean dust from the internal components and fan where fitted, check the electrical connections, and inspect the flue or vent so combustion gases exhaust safely outside, with a spillage test at the draught diverter on open-flued units.

Carbon monoxide safety test: using a calibrated CO analyser we test the flue gases and check for spillage into the room, then finish with a full operational test and a dated service report.

Licensed gasfitter servicing a wall-mounted gas wall furnace heater in a Melbourne home

Carbon Monoxide Safety and the Signs to Watch


Older open-flued wall furnaces are exactly the units Energy Safe Victoria flags as higher risk for carbon monoxide, so servicing them matters. A carbon monoxide alarm is a useful back-up, but it is never a substitute for a proper service by a qualified gasfitter. Book a service if you notice any of these signs.

A yellow flame or staining: the flame should be blue. A yellow or orange flame, or soot and brown or black staining on the wall above or around the unit, is a key carbon monoxide warning sign.

Ignition trouble: the heater will not light, or the pilot light keeps going out.

Weak heat, smells or noise: reduced heat output, a gas smell, or banging and rattling when it runs.

Flu-like symptoms: headaches, nausea, dizziness or tiredness that ease when you leave the room can indicate carbon monoxide. Turn the heater off and get it checked as a priority.

Gasfitter carrying out a carbon monoxide test on a gas wall heater in a Melbourne home

Why Regular Servicing Matters


Safety First

A service catches a cracked heat exchanger, a flue that is spilling, or a carbon monoxide leak before it can harm your family, with a proper CO test every time.

Lower Gas Bills

A clean, correctly tuned burner uses less gas to heat the room, which shows up as lower gas bills over a Melbourne winter.

Reliability & Warranty

Regular servicing means fewer breakdowns, a longer life for an older wall furnace, and a documented history that keeps any manufacturer warranty valid.

How Often to Service, and the Brands We Look After


Have your gas wall heater serviced at least every two years, in line with Energy Safe Victoria guidance, and every year for older units and open-flued wall furnaces. The best time is before winter, after the unit has sat idle over the warmer months. Melbourne's older housing stock is full of ageing Vulcan and Pyrox wall furnaces that genuinely warrant an annual check and carbon monoxide test.

You do not need to have bought your heater for us to service it. Our licensed gasfitters work on all the major wall heater brands found in Melbourne homes, including Rinnai, Braemar, Vulcan, Pyrox, Cannon, Brivis and Bonaire.

If a wall furnace has a cracked heat exchanger or the parts are obsolete, we will tell you honestly and recommend replacement as the safer option, and explain your heating options. For rental properties, we can also carry out the gas safety checks Victorian landlords are required to provide. There is no pressure and no upselling, just straight advice from a licensed team.

BM Heating and Cooling gas heating service van in Melbourne

Book Your Gas Wall Heater Service in Melbourne


Keep your family safe and your wall heater running efficiently through winter with a full service and carbon monoxide test by a licensed gasfitter. Our friendly team will sort it out and explain everything in plain language.

Call us now to book your service, or fill out our online form and we will get straight back to you.

Email: admin@bmheatingandcooling.com    Phone: 0487 395 496

Gas Wall Heater Servicing FAQs


At least every two years by a qualified gasfitter, in line with Energy Safe Victoria guidance. For older or open-flued wall furnaces, once a year is safer.

Burner and heat exchanger inspection and clean, a gas pressure test, a pilot, ignition and thermocouple check, a thermostat and flue check, an internal dust clean, and a carbon monoxide safety test.

Carbon monoxide is colourless and odourless, and any gas heater can leak it, including wall furnaces and space heaters. A carbon monoxide test detects a dangerous leak you cannot see or smell before it harms your family.

A yellow flame instead of blue, soot or staining on the wall above the unit, a pilot that will not stay lit, a gas smell, or headaches and nausea when it is running. Turn it off and book a service.

Yes. We service all major brands including Rinnai, Braemar, Vulcan, Pyrox, Cannon, Brivis and Bonaire, including older open-flued wall furnaces.

It is not a legal requirement for homeowners, but Energy Safe Victoria strongly recommends servicing at least every two years for safety, and manufacturers often require it to keep the warranty valid. For rentals, landlords have gas safety-check obligations.

We can service and repair most units. If the heat exchanger is cracked or the parts are obsolete, replacement is the safer option, and we will advise you honestly after inspection.

Most gas wall heater services take under an hour per unit. If we find a fault we will explain it and quote any repair separately.

CONTACT US TODAY!

NEED AN HVAC SERVICE, REPAIR OR QUOTE?
CONTACT US!

Brands We Service


WHAT OUR HAPPY CUSTOMERS SAY ★★★★★
WRITE A REVIEW ›
BM Heating & Cooling Reviews
5.0 ★★★★★ (250)