Servicing Melbourne Wide
Years of HVAC Experience
Price Beat Guarantee
Manufacturer Warranty*

Reverse Cycle Ducted Systems in Melbourne

CONTACT US

GET A FREE QUOTE.

A reverse cycle ducted system gives you whole-home heating and cooling from one energy-efficient electric unit, all controlled from a single point. At BM Heating & Cooling, we design and install ducted reverse cycle systems across Melbourne that keep every room comfortable through cold winters and hot summers, without a drop of gas. As an ARCtick-certified, VEU-approved installer, we handle the sizing, zoning, install and rebate paperwork so you get a tidy, efficient system and the government discount applied straight to your invoice.

Reverse Cycle Ducted Heating & Cooling for Melbourne Homes


A reverse cycle ducted system is a single electric solution that heats your home in winter and cools it in summer. One concealed indoor unit connects to a network of ducts, quietly delivering conditioned air to discreet vents in every room through one set of ductwork and one controller.

It suits Melbourne perfectly. Our weather swings from cold, damp mornings to sharp summer heat, and a reverse cycle ducted system covers both ends of that range from the same unit, so there is no separate heater and cooler to run, service or replace.

  • One system, whole home: even, comfortable temperatures across living areas and bedrooms.
  • Fully electric: no gas connection, and ready to pair with rooftop solar.
  • Designed for your home: we size and lay out the ducts around your floor plan and roof space.
Reverse cycle ducted air conditioning installation in a Melbourne home

How Reverse Cycle Ducted Air Conditioning Works


Reverse cycle works by moving heat rather than burning fuel to make it. In winter it draws warmth from the outside air and releases it inside; in summer it reverses the refrigerant cycle and pulls heat out of your home. Because it is only transferring heat, it delivers far more comfort per unit of electricity than an old gas or electric heater.

The system has four main parts working together:

  • Indoor fan coil unit: hidden in the roof space or under the floor.
  • Outdoor compressor: installed neatly beside the home.
  • Ducts and vents: carry conditioned air to each room through slim ceiling or floor outlets.
  • Zone controller: a wall pad or app that sets temperatures and switches rooms on or off.

Zoning & Everyday Efficiency


Zoning is where a ducted system saves you money. Instead of heating or cooling the whole house at once, you condition only the areas you are using, such as the living zones during the day and the bedrooms at night.

Room-by-room control: set different temperatures for different zones, or shut unused rooms off entirely.

Inverter efficiency: modern inverter systems ramp up and down smoothly instead of switching hard on and off, holding a steady temperature while drawing less power. They typically deliver around three units of heating or cooling for every one unit of electricity used.

Smart control: most systems we install include WiFi and app control, so you can adjust comfort or switch zones from your phone before you get home.

Discreet and quiet: only slim vents show inside, and inverter units run quietly in the background, so the system stays out of sight and out of mind.

Running fully electric also means you can pair the system with rooftop solar and cut your running costs further over time.

Wall-mounted zone controller for a ducted reverse cycle system

Benefits of a Ducted Reverse Cycle System


Whole-Home Comfort

Even, consistent temperatures across every room from a single system, with no cold spots and no separate units to juggle.

Energy Efficient

Inverter reverse cycle technology delivers roughly three units of heating or cooling per unit of electricity, so you get more comfort for less running cost.

Room-by-Room Zoning

Heat or cool only the areas you are using. Zoning trims waste and lets each part of the home sit at its own temperature.

Discreet & Quiet

Only slim vents are visible inside and the unit runs quietly, keeping the look of your home clean and uncluttered.

Fully Electric

No gas required. A reverse cycle ducted system is ready for an all-electric home and pairs neatly with rooftop solar.

Adds Value

A modern, efficient, whole-home climate system is a genuine selling point that adds comfort and appeal to your property.

VEU Rebates on Ducted Systems


Because a reverse cycle ducted system is efficient and fully electric, it is eligible under the Victorian Government's Victorian Energy Upgrades (VEU) program. Replacing an old gas ducted heater with an efficient electric system is one of the strongest ways to benefit.

The best part is how simple it is for you. The discount is applied as an upfront reduction on your installation invoice, not something you claim back later. As an accredited installer, BM Heating & Cooling handles the certificates and paperwork, and passes the value straight through to you.

How the VEU Discount Works

An approved high-efficiency system generates energy-saving certificates based on the emissions it avoids over its lifetime. Your accredited installer converts those certificates into a discount that comes straight off your install price on the day.

Eligibility generally applies to established Victorian homes, there is no income or means test, and a minimum customer contribution applies. The exact rebate value shifts with certificate pricing and program settings, so we confirm your current eligibility and figure as part of your free quote rather than quoting a number blind.

Our Installation Process


1. Free onsite assessment: we visit your home, look at your roof space, ceiling cavity and layout, and work out the right capacity and number of zones for the way you live.

2. System & zoning design: we recommend a quality inverter system and map the duct runs and zones to your floor plan, then give you a clear, itemised quote with your VEU discount applied.

3. Tidy installation: our licensed, ARCtick-certified installers fit the indoor and outdoor units, run the ducts and vents and set up the controller, usually within a day or two depending on the home. We protect your home and clean up as we go.

4. Commissioning & handover: we test every zone, balance the airflow and show you how to run the system and app before we leave.

Areas We Serve Across Melbourne


BM Heating & Cooling installs reverse cycle ducted systems right across Melbourne. From our base in the northern suburbs we regularly work through Preston, Reservoir, Coburg, Brunswick, Bundoora, Heidelberg, Ivanhoe, Northcote and Thornbury, and out to Melton and the wider metro area. Wherever you are in Melbourne, we can design and install a system to suit your home. See our full list of service areas or explore related options like split systems and reverse cycle air conditioning.

Outdoor reverse cycle condenser unit installed beside a Melbourne home

Quality Brands, Built to Last


The brand and quality of the unit matters. Good inverter systems run more efficiently, last longer and qualify for the strongest rebates and warranties. We install trusted reverse cycle brands and match the system to your home and budget rather than pushing one option.

We install leading reverse cycle brands including Mitsubishi Electric, Daikin, Fujitsu, Actron Air and other quality manufacturers. If you want a premium, ultra-quiet setup, ask us about a Mitsubishi Electric ducted system.

Every install is carried out by licensed, ARCtick-certified technicians and backed by manufacturer warranties and our own workmanship guarantee.

Reverse Cycle Ducted FAQs


It is a single electric system that both heats and cools your whole home. A concealed indoor unit pushes conditioned air through ducts to vents in each room, and it reverses the refrigerant cycle to switch between warming in winter and cooling in summer.

Yes. Melbourne swings from cold, damp winters to hot, dry summers, and one reverse cycle ducted system handles both ends of that range efficiently, so you do not need separate heating and cooling.

Modern inverter systems are among the most efficient ways to heat and cool a home, typically delivering around three units of heating or cooling for every one unit of electricity they use. Running fully electric also lets you pair it with rooftop solar.

Ducted reverse cycle systems are eligible under the Victorian Energy Upgrades program. Eligibility generally applies to established Victorian homes, there is no income test, and the discount is taken straight off your installation price rather than claimed back later. We confirm your eligibility as part of your quote.

Yes. Ducted systems can be zoned so you heat or cool only the areas you are using, such as living zones by day and bedrooms at night, which improves comfort and cuts running costs.

In most cases, yes. We assess your roof space, ceiling cavity and layout during the onsite quote to design a system and duct run that suits your existing home, not just new builds.

Many standard homes are completed in a day or two depending on layout, the number of zones and any ductwork required. We give you a clear timeline with your quote.

A yearly service keeps the system running efficiently, protects your warranty and catches small issues before they become breakdowns.

Get a Free Ducted Reverse Cycle Quote

Whole-home comfort, fully electric, with your VEU rebate applied. Servicing Melbourne wide.
Book Your Free Quote

Brands We Install


WHAT OUR HAPPY CUSTOMERS SAY ★★★★★
WRITE A REVIEW ›
BM Heating & Cooling Reviews
5.0 ★★★★★ (250)